A Single-Reciprocating-Piston Two-Phase Thermofluidic Prime-Mover
Научная публикация
| Общее |
Язык:
Английский,
Жанр:
Статья (Full article),
Статус опубликования:
Опубликована,
Оригинальность:
Оригинальная
|
| Журнал |
Energy
ISSN: 0360-5442
, E-ISSN: 1873-6785
|
| Вых. Данные |
Год: 2016,
Том: 104,
Страницы: 250-265
Страниц
: 16
DOI:
10.1016/j.energy.2016.02.113
|
| Ключевые слова |
Electrical analogy, Heat converter, Heat engine, Thermofluidic oscillator, Two-phase, Unsteady |
| Авторы |
Taleb Aly I.
1
,
Timmer Michael A.G.
1
,
El-Shazly Mohamed Y.
1
,
Samoilov Aleksandr
2,3
,
Kirillov Valeriy A.
2,3,4
,
Markides Christos N.
1
|
| Организации |
| 1 |
Clean Energy Processes (CEP) Laboratory, Department of Chemical Engineering, Imperial College London, South Kensington Campus, London, SW7 2AZ, UK
|
| 2 |
Boreskov Institute of Catalysis (BIC), pr. Lavrentieva 5, Novosibirsk, 630090, Russia
|
| 3 |
Limited Liability Company “UNICAT”, pr. Lavrentieva 5, Novosibirsk, 630090, Russia
|
| 4 |
Novosibirsk State University, Pirogova St. 2, Novosibirsk, 630090, Russia
|
|
Информация о финансировании (2)
|
1
|
Фонд «Сколково»
|
64 от 02.07.2012г.
|
|
2
|
Engineering and Physical Sciences Research Council
|
EP/J006041/1
|
We explore theoretically a thermodynamic heat-engine concept that has the potential of attaining a high efficiency and power density relative to competing solutions, while having a simple construction with few moving parts and dynamic seals, allowing low capital and operating costs, and long lifetimes. Specifically, an unsteady heat-engine device within which a working fluid undergoes a power cycle featuring phase-change, termed the ‘Evaporative Reciprocating-Piston Engine’ (EPRE) is considered as a potential prime mover for use in combined heat and power (CHP) applications. Based on thermal/fluid-electrical analogies, a theoretical ERPE device is conceptualized initially in the electrical-analogy domain as a linearized, closed-loop active electronic circuit model. The circuit-model representation is designed to potentially exhibit high efficiencies compared to similar, existing two-phase unsteady heat engines. From the simplified circuit model in the electrical domain, and using the thermal/fluid-electrical analogies, one possible configuration of a corresponding physical ERPE device is derived, based on an early prototype of a device currently under development that exhibits some similarities with the ERPE, and used as a physical manifestation of the proposed concept. The corresponding physical ERPE device relies on the alternating phase change of a suitable working-fluid (here, water) to drive a reciprocating displacement of a single vertical piston and to produce sustained oscillations of thermodynamic properties within an enclosed space. Four performance indicators are considered: the operational frequency, the power output, the exergy efficiency, and the heat input/temperature difference imposed externally on the device's heat exchangers that is necessary to sustain oscillations. The effects of liquid inertia, viscous drag, hydrostatic pressure, vapour compressibility and two-phase heat transfer in the various engine components/compartments are examined, via changes to thermodynamic/thermophysical/transport properties and also geometrical features of the ERPE. It is found that for high efficiency and power output: (1) the vapour dead-spaces must be minimized; (2) the length of the tube that connects the displacer and working cylinders must be of significant length; and, (3) the heat-exchanger blocks must have a low thermal resistance and high heat capacity. The methodological approach implemented in this study can be used to guide the proposal, early-stage design and verification of these complex unsteady thermodynamic systems, while offering important suggestions for improved performance and system optimization.