Effect of the Microchannel Plate Design on the Capacity of Methanol Steam Reformers Научная публикация
| Журнал |
Kinetics and Catalysis
ISSN: 0023-1584 , E-ISSN: 1608-3210 |
||||
|---|---|---|---|---|---|
| Вых. Данные | Год: 2007, Том: 48, Номер: 5, Страницы: 765-771 Страниц : 7 DOI: 10.1134/S0023158407050230 | ||||
| Ключевые слова | Catalyst Layer; Hydrogen Yield; Channel Cross Section; Methanol Conversion; Microchannel Plate | ||||
| Авторы |
|
||||
| Организации |
|
Информация о финансировании (2)
| 1 | Совет по грантам Президента Российской Федерации | НШ-6526.2006.3 |
| 2 | Министерство образования и науки Российской Федерации | 02.435.11.5004 |
Реферат:
Methanol steam reforming in microreactors is considered, and the effects of the microreactor geometry (cylindrical and rectangular) and microchannel plate (MCP) design on the hydrogen capacity of the microreactor is analyzed. The MCPs were made from aluminum foil, stainless steel, and foamed nickel by laser engraving, electrochemical etching, and pressing. The amount of catalyst powder (CuO/ZnO = 40: 60 mol/mol) fixed on one MCP was 0.04–2.5 g. The specific hydrogen capacity (U w) of the cylindrical microreactor is more than 3 times as high as the U w of the rectangular microreactor and is 6 times as high as the U w of a conventional fixed-bed catalytic reactor. This gain in hydrogen capacity is due to the more efficient use of the catalyst in the microreactors. The MCP design, which determines the residence time of the reactants in the microreactor, also has a significant effect on the capacity of the microreactor.
Библиографическая ссылка:
Makarshin L.L.
, Andreev D.V.
, Gribovskii A.G.
, Dutov P.M.
, Khantakov R.M.
, Parmon V.N.
Effect of the Microchannel Plate Design on the Capacity of Methanol Steam Reformers
Kinetics and Catalysis. 2007. V.48. N5. P.765-771. DOI: 10.1134/S0023158407050230 WOS Scopus РИНЦ CAPlusCA OpenAlex
Effect of the Microchannel Plate Design on the Capacity of Methanol Steam Reformers
Kinetics and Catalysis. 2007. V.48. N5. P.765-771. DOI: 10.1134/S0023158407050230 WOS Scopus РИНЦ CAPlusCA OpenAlex
Оригинальная:
Макаршин Л.Л.
, Андреев Д.В.
, Грибовский А.Г.
, Дутов П.М.
, Хантаков Р.М.
, Пармон В.Н.
Исследование влияния конструкции микроканальных пластин на производительность микрореакторов паровой конверсии метанола
Кинетика и катализ. 2007. Т.48. №5. С.816-822. РИНЦ
Исследование влияния конструкции микроканальных пластин на производительность микрореакторов паровой конверсии метанола
Кинетика и катализ. 2007. Т.48. №5. С.816-822. РИНЦ
Даты:
| Поступила в редакцию: | 22 июн. 2006 г. |
| Опубликована в печати: | 1 сент. 2007 г. |
Идентификаторы БД:
| Web of science: | WOS:000249971500023 |
| Scopus: | 2-s2.0-35148813980 |
| РИНЦ: | 13538436 |
| Chemical Abstracts: | 2007:1138048 |
| Chemical Abstracts (print): | 150:241277 |
| OpenAlex: | W1989710198 |