An Advanced Solid Sorption Chiller Using SWS-1L | Sciact - CRIS-система Института катализа

An Advanced Solid Sorption Chiller Using SWS-1L Научная публикация

Журнал

Applied Thermal Engineering
ISSN: 1359-4311 , E-ISSN: 1873-5606

Вых. Данные

Год: 2007, Том: 27, Номер: 13, Страницы: 2200-2204 Страниц : 5 DOI: 10.1016/j.applthermaleng.2005.07.023

Ключевые слова

Adsorption, Air conditioning, Coated sorbent bed, Selective water sorbent, SWS

Авторы

Freni A. ¹ , Russo G. ¹ , Vasta S. ¹ , Tokarev M.M. ² , Aristov Y.I. ² , Restuccia G. ¹

Организации

1	CNR—Istituto di Tecnologie Avanzate per l’Energia, Nicola Giordano, Messina 98126, Italy
2	Boreskov Institute of Catalysis, Pr. Ak. Lavrentieva 5, Novosibirsk 630090, Russia

Информация о финансировании (3)

1	Президиум РАН
2	National Research Council
3	North Atlantic Treaty Organization	PST.CLG.979051

In this paper, the experimental testing on an advanced solid sorption chiller based on a heat exchanger coated with a compact layer of SWS-1L (CaCl2 in mesoporous silica gel) is presented. The experimental results showed a specific power of 150–200 W/kg of adsorbent and a cycle time of 10–20 min. These values are sensibly better (i.e. one order of magnitude different) than those measured in the same unit working with a SWS-1L pelletised bed. The cooling COP ranged between 0.15 and 0.3, depending on the operating conditions.

Freni A. , Russo G. , Vasta S. , Tokarev M.M. , Aristov Y.I. , Restuccia G.
An Advanced Solid Sorption Chiller Using SWS-1L
Applied Thermal Engineering. 2007. V.27. N13. P.2200-2204. DOI: 10.1016/j.applthermaleng.2005.07.023 WOS Scopus РИНЦ OpenAlex

Поступила в редакцию:	24 февр. 2005 г.
Принята к публикации:	25 июл. 2005 г.
Опубликована online:	30 сент. 2005 г.
Опубликована в печати:	1 сент. 2007 г.

Web of science:	WOS:000247862800008
Scopus:	2-s2.0-34249073723
РИНЦ:	13557129
OpenAlex:	W1968686688

БД	Цитирований
Web of science	108
Scopus	117
РИНЦ	112
OpenAlex	122