Sciact
  • EN
  • RU

Investigating the Process of Heavy Crude Oil Steam Cracking in the Presence of Dispersed Catalysts. II: Investigating the Effect of Ni-Containing Catalyst Concentration on the Yield and Properties of Products Full article

Journal Catalysis in Industry
ISSN: 2070-0504 , E-ISSN: 2070-0555
Output data Year: 2016, Volume: 8, Number: 4, Pages: 328-335 Pages count : 8 DOI: 10.1134/S2070050416040036
Tags catalytic steam cracking, heavy crude oil, heavy oil upgrading, nanodispersed catalyst, nickel
Authors Yeletskii P.M. 1 , Mironenko O.O. 1 , Sosnin G.A. 1,2 , Bulavchenko O.A. 1,2 , Stonkus O.A. 1,2 , Yakovlev V.A. 1
Affiliations
1 Boreskov Institute of Catalysis, Siberian Branch, Russian Academy of Sciences, Novosibirsk, 630090 Russia
2 Novosibirsk State University, Novosibirsk, 630090 Russia

Funding (1)

1 Russian Science Foundation 15-13-00106

Abstract: The process of heavy crude oil (HCO) steam cracking under a batch regime at 425°C in the presence of Ni-containing nanodispersed catalyst (0.3–2.0 wt % with respect to Ni) is investigated. It is established that using this catalyst facilitates the upgrading of semi-synthetic oil produced from HCO: the Н: С ratio rises (in comparison to steam cracking with no catalyst), and the sulfur content and viscosity are reduced. The Н: С ratio in the liquid products grows slightly along with the catalyst content, but the yield of liquid products falls from 81 to 76% during the process with a simultaneous increase in the yield of coke and gaseous products (from 8 to 13 and from 2 to 4 wt %, respectively). Catalyst with coke residue is investigated by means of XRD and TEM. It is shown that nanosized particles of the Ni9S8 phase with sizes of 15–40 nm form from the catalyst precursor (Ni(NO3)2 · 6H2O) under the process conditions. The selection and investigation of catalytic systems for heavy crude oil cracking in the presence of superheated steam, along with optimization of the process conditions, are required to further enhance the efficiency of the upgrading process
Cite: Yeletskii P.M. , Mironenko O.O. , Sosnin G.A. , Bulavchenko O.A. , Stonkus O.A. , Yakovlev V.A.
Investigating the Process of Heavy Crude Oil Steam Cracking in the Presence of Dispersed Catalysts. II: Investigating the Effect of Ni-Containing Catalyst Concentration on the Yield and Properties of Products
Catalysis in Industry. 2016. V.8. N4. P.328-335. DOI: 10.1134/S2070050416040036 WOS Scopus РИНЦ OpenAlex
Original: Елецкий П.М. , Мироненко О.О. , Соснин Г.А. , Булавченко О.А. , Стонкус О.А. , Яковлев В.А.
Исследование процесса каталитического парового крекинга тяжелой нефти в присутствии дисперсных катализаторов. Часть 2. Изучение влияния концентрации Ni-содержащего катализатора на выход и свойства продуктов
Катализ в промышленности. 2016. Т.16. №4. С.42-50. DOI: 10.18412/1816-0387-2016-4-42-50 РИНЦ AN OpenAlex
Dates:
Submitted: May 18, 2016
Published print: Oct 1, 2016
Published online: Dec 28, 2016
Identifiers:
Web of science: WOS:000390991400006
Scopus: 2-s2.0-85007106879
Elibrary: 29471064
OpenAlex: W2563892779
Citing:
DB Citing
Web of science 13
Scopus 11
Elibrary 11
OpenAlex 13
Altmetrics: