Influence of the Composition and Properties of Molding Bodies on the Characteristics of Corundum Block Carriers Научная публикация
| Журнал |
Glass and Ceramics
ISSN: 0361-7610 , E-ISSN: 1573-8515 |
||
|---|---|---|---|
| Вых. Данные | Год: 2018, Номер: 11-12, Страницы: 393-398 Страниц : 6 DOI: 10.1007/s10717-018-0002-0 | ||
| Ключевые слова | corundum block carrier, extrusion molding, structural and mechanical properties | ||
| Авторы |
|
||
| Организации |
|
Информация о финансировании (2)
| 1 | Федеральное агентство научных организаций России | V.45.3.4. |
| 2 | Федеральное агентство научных организаций России | 0303-2016-0004 |
Реферат:
Extrusion molding, varying the particle size and the conditions for obtaining corundum, was used to obtain ceramic block carriers. The structural and mechanical properties of the molding bodies were investigated, and the textural and strength characteristics of the blocks after calcination were determined. It was shown that the use of corundum powder obtained by mixing particles of different size results in the production of molding bodies of the first or fourth structural-mechanical type and makes it possible to produce ceramic block carrier with channel density about 200 pieces/inch2, mechanical strength at least 4.3 MPa, and high resistance to thermal cycling.
Библиографическая ссылка:
Kruglyakov V.Y.
, Sutormina E.F.
, Kulikovskaya N.A.
, Rudina N.A.
, Isupova L.A.
Influence of the Composition and Properties of Molding Bodies on the Characteristics of Corundum Block Carriers
Glass and Ceramics. 2018. N11-12. P.393-398. DOI: 10.1007/s10717-018-0002-0 WOS Scopus РИНЦ CAPlus OpenAlex
Influence of the Composition and Properties of Molding Bodies on the Characteristics of Corundum Block Carriers
Glass and Ceramics. 2018. N11-12. P.393-398. DOI: 10.1007/s10717-018-0002-0 WOS Scopus РИНЦ CAPlus OpenAlex
Оригинальная:
Кругляков В.Ю.
, Сутормина Е.Ф.
, Куликовская Н.А.
, Рудина Н.А.
, Исупова Л.А.
Влияние состава и свойств формовочных масс на характеристики корундовых блочных носителей
Стекло и керамика. 2017. №11. С.11-17. РИНЦ
Влияние состава и свойств формовочных масс на характеристики корундовых блочных носителей
Стекло и керамика. 2017. №11. С.11-17. РИНЦ
Даты:
| Опубликована в печати: | 1 мар. 2018 г. |
| Опубликована online: | 4 апр. 2018 г. |
Идентификаторы БД:
| Web of science: | WOS:000429795500003 |
| Scopus: | 2-s2.0-85044944382 |
| РИНЦ: | 35517899 |
| Chemical Abstracts: | 2018:763167 |
| OpenAlex: | W2795704573 |