Catalytic Steam Cracking of Heavy Oil Feedstocks: A Review Обзор
| Журнал |
Catalysis in Industry
ISSN: 2070-0504 , E-ISSN: 2070-0555 |
||||
|---|---|---|---|---|---|
| Вых. Данные | Год: 2018, Том: 10, Номер: 3, Страницы: 185-201 Страниц : 17 DOI: 10.1134/s2070050418030042 | ||||
| Ключевые слова | upgrading of heavy oil feedstock, bitumen, vacuum residue, catalytic steam cracking, hydrovisbreaking, oxidative cracking, superheated steam, steam reforming | ||||
| Авторы |
|
||||
| Организации |
|
Информация о финансировании (1)
| 1 | Российский научный фонд | 15-13-00106 |
Реферат:
In view of the worsening quality of crude oil, the use of unconventional petroleum feedstocks (heavy oils, bitumens, residues, etc.) in processing is becoming increasingly important. The processing of heavy oil feedstocks (HOF) requires the development of new effective techniques that will lead to an increase in the yield of light fractions, suppression of coke formation, and saturation of liquid products with hydrogen. At the same time, the capital and operating costs of the process should be minimized because the cost of production and transportation for HOF is several times higher than for light and middle oils. The present review summarizes the results of studies of the catalytic steam cracking of HOF—a potential alternative to conventional HOF upgrading based on carbon rejection (thermal cracking, visbreaking, catalytic cracking) or hydrogen addition (hydrocracking). The main differences of this process from HOF upgrading with water (aqueous pyrolysis in sub- or supercritical water), the peculiarities of the catalytic steam cracking depending on the process conditions and the type of catalyst, and possible mechanisms of water participation in the process were discussed.
Библиографическая ссылка:
Eletskii P.M.
, Mironenko O.O.
, Kukushkin R.G.
, Sosnin G.A.
, Yakovlev V.A.
Catalytic Steam Cracking of Heavy Oil Feedstocks: A Review
Catalysis in Industry. 2018. V.10. N3. P.185-201. DOI: 10.1134/s2070050418030042 WOS Scopus РИНЦ OpenAlex
Catalytic Steam Cracking of Heavy Oil Feedstocks: A Review
Catalysis in Industry. 2018. V.10. N3. P.185-201. DOI: 10.1134/s2070050418030042 WOS Scopus РИНЦ OpenAlex
Оригинальная:
Елецкий П.М.
, Мироненко О.О.
, Кукушкин Р.Г.
, Соснин Г.А.
, Яковлев В.А.
Каталитический паровой крекинг тяжелого нефтяного сырья: обзор
Катализ в промышленности. 2018. Т.18. №1. С.13-32. DOI: 10.18412/1816-0387-2018-1-13-32 РИНЦ CAPlus OpenAlex
Каталитический паровой крекинг тяжелого нефтяного сырья: обзор
Катализ в промышленности. 2018. Т.18. №1. С.13-32. DOI: 10.18412/1816-0387-2018-1-13-32 РИНЦ CAPlus OpenAlex
Даты:
| Поступила в редакцию: | 4 дек. 2017 г. |
| Опубликована в печати: | 1 июл. 2018 г. |
| Опубликована online: | 9 окт. 2018 г. |
Идентификаторы БД:
| Web of science: | WOS:000446835400002 |
| Scopus: | 2-s2.0-85054806526 |
| РИНЦ: | 38633688 |
| OpenAlex: | W2897857711 |