Mechanochemical Synthesis of Nanocrystalline Nickel–Molybdenum Compounds and Their Morphology and Application in Catalysis: II. Effect of Mechanochemical Activation Parameters — Process Power Density and Exposure Time — on the Composition and Structure of Nickel–Molybdenum Compounds | Sciact - CRIS-система Института катализа

Mechanochemical Synthesis of Nanocrystalline Nickel–Molybdenum Compounds and Their Morphology and Application in Catalysis: II. Effect of Mechanochemical Activation Parameters — Process Power Density and Exposure Time — on the Composition and Structure of Nickel–Molybdenum Compounds Научная публикация

Журнал

Kinetics and Catalysis
ISSN: 0023-1584 , E-ISSN: 1608-3210

Вых. Данные

Год: 2014, Том: 55, Номер: 1, Страницы: 121-129 Страниц : 9 DOI: 10.1134/S0023158414010042

Ключевые слова

Power Density; Atomic Ratio; Differential Thermal Analysis Curve; Hydrotalcite; Hydrotreating

Авторы

Knyazheva O.A. ¹ , Baklanova O.N. ¹ , Lavrenov A.V. ¹ , Drozdov V.A. ^1,2 , Leont’eva N.N. ¹ , Vasilevich A.V. ¹ , Shilova A.V. ¹ , Likholobov V.A. ^1,2

Организации

1	Institute of Hydrocarbon Processing, Siberian Branch, Russian Academy of Sciences, Omsk, 644040 Russia
2	Omsk State Technical University, Omsk, 644050 Russia

The effect of mechanochemical activation parameters—process power density and the time of treatment of a mixture of nickel hydroxocarbonate NiCO3 · 2Ni(OH)2 · nH2O and ammonium paramolybdate (NH4)6Mo7O24 · 4H2O —on the phase composition, specific surface area, and morphology of mechanically activated products at different Ni : Mo atomic ratios was studied. It was found that, at a mechanochemical activation process power density of 6.2 W/g, layered transition metal molybdates (LTM compounds) with different amounts of crystal water were the constituents of the products, whereas the products mechanically activated at a power density of 28.0 W/g contained a mixture of LTM compounds and heteropoly compounds with the Anderson structure regardless of activation time.

Knyazheva O.A. , Baklanova O.N. , Lavrenov A.V. , Drozdov V.A. , Leont’eva N.N. , Vasilevich A.V. , Shilova A.V. , Likholobov V.A.
Mechanochemical Synthesis of Nanocrystalline Nickel–Molybdenum Compounds and Their Morphology and Application in Catalysis: II. Effect of Mechanochemical Activation Parameters — Process Power Density and Exposure Time — on the Composition and Structure of Nickel–Molybdenum Compounds
Kinetics and Catalysis. 2014. V.55. N1. P.121-129. DOI: 10.1134/S0023158414010042 WOS Scopus РИНЦ CAPlusCA OpenAlex

Княжева О.А. , Бакланова О.Н. , Лавренов А.В. , Дроздов В.А. , Леонтьева Н.Н. , Василевич А.В. , Шилова А.В. , Лихолобов В.А.
Механохимический синтез нанокристаллических никель-молибденовых соединений, их морфологические особенности и применение в катализе. II. Влияние параметров механохимической активации – энергонапряженности процесса и времени воздействия – на состав и структуру никель-молибденовых соединений
Кинетика и катализ. 2014. Т.55. №1. С.126-134. DOI: 10.7868/S0453881114010043 РИНЦ OpenAlex

Поступила в редакцию:	7 февр. 2013 г.
Опубликована в печати:	1 янв. 2014 г.
Опубликована online:	27 февр. 2014 г.

Web of science:	WOS:000332333700018
Scopus:	2-s2.0-84897746243
РИНЦ:	21870891
Chemical Abstracts:	2014:329183
Chemical Abstracts (print):	171:56173
OpenAlex:	W2026015339

БД	Цитирований
РИНЦ	7
Scopus	6
Web of science	7
OpenAlex	6