Sciact
  • EN
  • RU

Hydroconversion of Methyl Palmitate over Ni-Phosphide Catalysts on SAPO-11 and ZSM-5 Composite Supports Full article

Journal Microporous and Mesoporous Materials
ISSN: 1387-1811 , E-ISSN: 1873-3093
Output data Year: 2023, Volume: 359, Article number : 112667, Pages count : 14 DOI: 10.1016/j.micromeso.2023.112667
Tags Hydrodeoxygenation; Isomerization; Cracking; Nickel phosphide catalysts; SAPO-11; ZSM-5
Authors Shamanaev Ivan V. 1 , Vlasova Evgenia N. 1 , Scherbakova Anastasia M. 1 , Pakharukova Vera P. 1 , Gerasimov Evgeny Y. 1 , Yakovlev Ilya V. 1,2 , Fedorov Alexey Yu 1 , Bukhtiyarova Galina A. 1
Affiliations
1 Boreskov Institute of Catalysis, 630090, Lavrentiev ave. 5, Novosibirsk, Russia
2 Novosibirsk State University, 630090, Pirogova str. 1, Novosibirsk, Russia

Funding (1)

1 Russian Science Foundation 22-13-00371

Abstract: Zeolite materials (SAPO-11 or ZSM-5) were used to prepare modified Al2O3 supports by mixing with Al oxide hydroxide, peptization with HNO3 and subsequent extrusion. The obtained Al2O3-SAPO-11 and Al2O3-ZSM-5 (with 30 wt% zeolite content) were impregnated by solutions containing Ni and P precursors: phosphate (A), phosphite (I), and hypophosphite (H). Ni-phosphide catalysts were prepared by temperature-programmed reduction in hydrogen flow and characterized by ICP-AES chemical analysis, low-temperature N2 physisorption, H2-TPR, NH3-TPD, XRD, 27Al MAS NMR, XPS. The catalysts were tested in methyl palmitate (MP) hydroconversion (HC, i.e. hydrodeoxygenation (HDO) + hydroisomerization/hydrocracking). 100% MP conversion was achieved over all catalysts (flow reactor at 340 °C, 2.0 MPa, 5.3 h−1). For Ni2P/Al2O3-SAPO-11 catalysts the overall yield of iso-alkanes (iso-C15 and iso-C16) increased in the following order of precursors: A < I < H. The highest yield of iso-alkanes was 21% over Ni2P/Al2O3-SAPO-11 H catalyst. Ni2P/Al2O3-ZSM-5 samples possessed high cracking activity. Alkanes from MP HDO as well as the solvent (n-dodecane) were almost completely transformed to C6–C9 alkanes at 340 °C. Decreasing temperature (290, 270 °C) did not result in significant yield of iso-alkanes over Ni2P/Al2O3-ZSM-5 catalysts.
Cite: Shamanaev I.V. , Vlasova E.N. , Scherbakova A.M. , Pakharukova V.P. , Gerasimov E.Y. , Yakovlev I.V. , Fedorov A.Y. , Bukhtiyarova G.A.
Hydroconversion of Methyl Palmitate over Ni-Phosphide Catalysts on SAPO-11 and ZSM-5 Composite Supports
Microporous and Mesoporous Materials. 2023. V.359. 112667 :1-14. DOI: 10.1016/j.micromeso.2023.112667 WOS Scopus РИНЦ AN OpenAlex
Dates:
Submitted: Apr 28, 2023
Accepted: May 30, 2023
Published online: Jun 1, 2023
Published print: Sep 1, 2023
Identifiers:
Web of science: WOS:001013476400001
Scopus: 2-s2.0-85160849392
Elibrary: 53951856
Chemical Abstracts: 2023:1215523
OpenAlex: W4379012133
Citing:
DB Citing
Scopus 8
Elibrary 6
Web of science 7
OpenAlex 8
Altmetrics: