Thermal Stability of the Al–2.3%V Powder Compared with That of Al Used on 3D Printers Depending on the Heating Rate | Sciact - CRIS-система Института катализа

Thermal Stability of the Al–2.3%V Powder Compared with That of Al Used on 3D Printers Depending on the Heating Rate Научная публикация

Журнал

Russian Journal of Physical Chemistry A
ISSN: 0036-0244 , E-ISSN: 1531-863X

Вых. Данные

Год: 2023, Том: 97, Номер: 10, Страницы: 2338-2344 Страниц : 7 DOI: 10.1134/s0036024423100199

Ключевые слова

aluminum,powders,alloy,vanadium alloy,oxidation,heating rate

Авторы

Shevchenko V.G. ¹ , Eselevich D.A. ¹ , Popov N.A. ¹ , Baklanov M.N. ¹ , Vinokurov Z.S. ² , Кim G.А. ³

Организации

1	Institute of Solid State Chemistry, Ural Branch, Russian Academy of Sciences, Yekaterinburg, Russia
2	SKIF Multiaccess Center, Institute of Catalysis, Siberian Branch, Russian Academy of Sciences, Koltsovo Science City, Russia
3	Postovskii Institute of Organic Synthesis, Ural Branch, Russian Academy of Sciences, Yekaterinburg, Russia

The oxidation stability and phase formation sequence for pure aluminum APK and Al–2.3%V alloy heated in air at rates of up to 100°C/min were analyzed by thermogravimetry with differential scanning calorimetry and X-ray diffraction using synchrotron radiation. It was established that an increase in the heating rate from 10 to 100°C/min does not significantly change the thermal stability of the modified Al powder. The presence of Al3V and Al10V intermetallic compounds, as well as a small amount of γ-Al2O3, in the structure of the alloy should favor consolidation of metal particles and reduce the porosity of the resulting product during selective laser melting (SLM).

Shevchenko V.G. , Eselevich D.A. , Popov N.A. , Baklanov M.N. , Vinokurov Z.S. , Кim G.А.
Thermal Stability of the Al–2.3%V Powder Compared with That of Al Used on 3D Printers Depending on the Heating Rate
Russian Journal of Physical Chemistry A. 2023. V.97. N10. P.2338-2344. DOI: 10.1134/s0036024423100199 WOS Scopus CAPlusCA OpenAlex СКИФ ID

Шевченко В.Г. , Еселевич Д.А. , Попов Н.А. , Бакланов М.Н. , Винокуров З.С. , Ким Г.А.
Термическая устойчивость порошка Al–2.3%V в сравнении с Al, применяемым на 3D-принтерах, в зависимости от скорости нагрева
Журнал физической химии. 2023. Т.97. №10. С.1528-1534. DOI: 10.31857/S0044453723100199 OpenAlex СКИФ ID

Поступила в редакцию:	6 февр. 2023 г.
Принята к публикации:	28 апр. 2023 г.
Опубликована в печати:	6 окт. 2023 г.
Опубликована online:	6 окт. 2023 г.

Web of science:	WOS:001081852800030
Scopus:	2-s2.0-85173623586
Chemical Abstracts:	2023:2077615
Chemical Abstracts (print):	184:256815
OpenAlex:	W4387381153
СКИФ ID:	1488

БД	Цитирований
OpenAlex	2
Web of science	2
Scopus	2