Sciact
  • EN
  • RU

Synthesis of Electroexplosive NiW and NiWMo Alloys for Catalytic Processing of Trichloroethylene into Carbon Nanomaterials Научная публикация

Журнал Nano-Structures and Nano-Objects
, E-ISSN: 2352-507X
Вых. Данные Год: 2024, Том: 39, Номер статьи : 101242, Страниц : 10 DOI: 10.1016/j.nanoso.2024.101242
Ключевые слова Nickel-based alloys; Exploding wires; Chlorinated hydrocarbons; Catalytic pyrolysis; Carbon nanofibers
Авторы Pervikov Alexander V. 1,2 , Pustovalov Alexey V. 1,3 , Potylitsyna Arina R. 1 , Bauman Yury I. 1 , Vedyagin Aleksey A. 1 , Mishakov Ilya V. 1
Организации
1 Boreskov Institute of Catalysis SB RAS, Novosibirsk, Russia
2 Institute of Strength Physics and Materials Science SB RAS, Tomsk, Russia
3 National Research Tomsk Polytechnic University, Tomsk, Russia

Информация о финансировании (1)

1 Российский научный фонд 22-13-00406

Реферат: The catalytic activity of the powders based on Ni-Mo/W nanoparticles in the decomposition reaction of trichloroethylene (TCE), leading to the production of carbon nanofibers (CNFs), was investigated. The initial alloy powders were obtained by joint electrical explosion of Ni/W and Ni/Mo/W wires in an argon/nitrogen atmosphere. The specific surface area of the powders varied from 3.9 to 6.1 m2/g. In all the cases, the Ni100-xW(Mo)x solid solution phases with a lattice parameter varied from 3.526 to 3.61 Å and the α-W and W3O phases were registered. The catalytic activity of the powders was tested in the catalytic pyrolysis of TCE. The powders produced in the nitrogen atmosphere exhibited a noticeably higher activity. Among these samples, the highest carbon yield of 18.5 g/gcat was recorded for an alloy of the Ni90W5Mo5 composition. The carbon nanofibers, resulting from the decomposition of TCE over the alloy powders, are 50–300 nm in diameter and up to 2 μm in length. The bulk density of the accumulated CNFs was found to be in the range of 65–115 g/L, while the specific surface area exceeded 130 m2/g.
Библиографическая ссылка: Pervikov A.V. , Pustovalov A.V. , Potylitsyna A.R. , Bauman Y.I. , Vedyagin A.A. , Mishakov I.V.
Synthesis of Electroexplosive NiW and NiWMo Alloys for Catalytic Processing of Trichloroethylene into Carbon Nanomaterials
Nano-Structures and Nano-Objects. 2024. V.39. 101242 :1-10. DOI: 10.1016/j.nanoso.2024.101242 Scopus CAPlus OpenAlex
Даты:
Поступила в редакцию: 4 мар. 2024 г.
Принята к публикации: 14 июн. 2024 г.
Опубликована online: 2 июл. 2024 г.
Опубликована в печати: 2 сент. 2024 г.
Идентификаторы БД:
Scopus: 2-s2.0-85197241133
Chemical Abstracts: 2024:1525626
OpenAlex: W4400230586
Цитирование в БД: Пока нет цитирований
Альметрики: