Sciact
  • EN
  • RU

Heat Transfer Coefficients in a Metal-Sorbent System for Heat Generation Stage Initiated by a Pressure Jump Тезисы доклада

Конференция 15th International Conference on Thermal Engineering: Theory and Applications
29 мая - 1 июн. 2024 , Tashkent
Журнал ICTEA: International Conference on Thermal Engineering
ISSN: 2562-9034
Вых. Данные Год: 2024, Том: 1, Номер: 1,
Ключевые слова Adsorber heat-exchanger; Adsorption heat storage; Heat transfer coefficient; Methanol sorption
Авторы Grekova A. 1 , Tokarev M. 1 , Strelova S. 1
Организации
1 Boreskov Institute of Catalysis, Novosibirsk, Russia

Информация о финансировании (1)

1 Российский научный фонд 21-79-10183

Реферат: Adsorption heat storage is a promising energy-saving technology that gives a possibility to make heat from alternative energy sources available to the consumer, as well as to use waste heat from industry and transport. To increase the efficiency of the adsorption heat accumulator, it is necessary to improve heat transfer in the sorbent-heat exchanger system. In this paper we consider a methodology for measuring the heat transfer coefficient of the metal-sorbent under real working conditions at the stage of the heat release initiated by a sharp change in pressure over the sorbent. The value of the heat transfer coefficient obtained for the flat layer of the granules placed on a metal plate was verified by measuring the power generated in a real heat exchanger under the same conditions.
Библиографическая ссылка: Grekova A. , Tokarev M. , Strelova S.
Heat Transfer Coefficients in a Metal-Sorbent System for Heat Generation Stage Initiated by a Pressure Jump
ICTEA: International Conference on Thermal Engineering. 2024. Т.1. №1. Scopus
Идентификаторы БД:
Scopus: 2-s2.0-85199157124
Цитирование в БД: Пока нет цитирований