Variation in the Shape of Catalyst Modules during the Autothermal Reforming of Hexadecane, Propane, and Methane by the Mathematical Modeling Method | Sciact - CRIS-система Института катализа

Variation in the Shape of Catalyst Modules during the Autothermal Reforming of Hexadecane, Propane, and Methane by the Mathematical Modeling Method Научная публикация

Журнал

Catalysis in Industry
ISSN: 2070-0504 , E-ISSN: 2070-0555

Вых. Данные

Год: 2024, Том: 16, Номер: 4, Страницы: 460–468 Страниц : 9 DOI: 10.1134/S2070050424700302

Ключевые слова

autothermal reforming, mathematical modeling, geometry optimization, diesel, methane, propane, hydrogen, structured catalyst

Авторы

Zazhigalov S.V. ¹ , Shilov V.A. ^1,2 , Zagoruiko A.N. ¹ , Snytnikov P.V. ¹

Организации

1	Boreskov Institute of Catalysis, Siberian Branch, Russian Academy of Sciences, Novosibirsk, 630090 Russia
2	Novosibirsk State University, Novosibirsk, 630090 Russia

Информация о финансировании (1)

Российский научный фонд

19-19-00257

Mathematical modeling for the autothermal reforming of hexadecane, propane, and methane in the presence of catalyst modules of different geometric shapes has been conducted. It has been shown that a module shape that is convex toward the oncoming reaction stream can increase the maximum temperature in the frontal zone, whereas a concave shape contributes to a more uniform temperature distribution throughout the entire length of the catalyst bed. In addition, the effect of the reaction flow rate on the change in the temperature gradient has been studied; the results can subsequently be used to prevent local overheating and catalyst deactivation. The results obtained can be used as a basis for future research in the field of autothermal reforming and optimization of geometric parameters of catalysts for the conversion of hydrocarbon fuels to synthesis gas.

Zazhigalov S.V. , Shilov V.A. , Zagoruiko A.N. , Snytnikov P.V.
Variation in the Shape of Catalyst Modules during the Autothermal Reforming of Hexadecane, Propane, and Methane by the Mathematical Modeling Method
Catalysis in Industry. 2024. V.16. N4. P.460–468. DOI: 10.1134/S2070050424700302 WOS Scopus РИНЦ

Зажигалов С.В. , Шилов В.А. , Загоруйко А.Н. , Снытников П.В.
Вариация формы каталитических блоков в процессе автотермического риформинга гексадекана, пропана и метана методом математического моделирования
Катализ в промышленности. 2024. Т.24. №2. С.51-58. DOI: 10.18412/1816-0387-2024-2-51-58 РИНЦ OpenAlex

Поступила в редакцию:	16 нояб. 2023 г.
Принята к публикации:	4 дек. 2023 г.
Опубликована в печати:	1 дек. 2024 г.
Опубликована online:	27 янв. 2025 г.

Web of science:	WOS:001408605200005
Scopus:	2-s2.0-85217683845
РИНЦ:	80240204

Пока нет цитирований