Sciact
  • EN
  • RU

Studying the Synthesis of Nitrous Oxide in a Microstructured Split-Flow Reactor Научная публикация

Журнал Catalysis in Industry
ISSN: 2070-0504 , E-ISSN: 2070-0555
Вых. Данные Год: 2025, Том: 17, Номер: 2, Страницы: 177-191 Страниц : 15 DOI: 10.1134/s2070050425700084
Ключевые слова catalytic microreactor, nitrous oxide, scaling
Авторы Sheboltasov A.G. 1,2 , Vernikovskaya N.V. 1,2 , Chumachenko V.A. 1
Организации
1 Boreskov Institute of Catalysis, Siberian Branch, Russian Academy of Sciences (BIC SB RAS), Novosibirsk, 630090 Russia
2 Novosibirsk State Technical University (NSTU), Novosibirsk, 630073 Russia

Информация о финансировании (1)

1 Министерство науки и высшего образования Российской Федерации (с 15 мая 2018) FWUR-2024-0037

Реферат: This work is devoted to the mathematical modeling of N2O synthesis via NH3 oxidation on a Mn/Bi/Al oxide catalyst in a microstructured split-flow reactor (MSR). The characteristics of the process are studied at different linear flow velocities, inlet ammonia concentrations, and reactor edge temperatures. Parameters are determined that endure an efficient process in the microstructured reactor under thermally admissible conditions. The possibility is shown of scaling the MSR by multiplying its geometric dimensions with no overheating in the reaction zone. Results show that in a microstructured reactor with such a configuration, the capacity for producing N2О can be increased by around 12 times, relative to the best performance characteristics of a conventional microreactor, and the catalyst’s specific production capacity is approximately 1.5 times higher than in a traditional tubular reactor. This allows the creation of low-tonnage plants for producing high-purity nitrous oxide for different applications by scaling microreactor systems. The results in this work correspond to the concept of distributed chemicalization and contribute to overcoming the barrier between laboratory catalytic reactors and industrial-level devices.
Библиографическая ссылка: Sheboltasov A.G. , Vernikovskaya N.V. , Chumachenko V.A.
Studying the Synthesis of Nitrous Oxide in a Microstructured Split-Flow Reactor
Catalysis in Industry. 2025. V.17. N2. P.177-191. DOI: 10.1134/s2070050425700084 WOS
Оригинальная: Шеболтасов А.Г. , Верниковская Н.В. , Чумаченко В.А.
Исследование процесса получения закиси азота в микроструктурированном реакторе щелевого типа
Катализ в промышленности. 2024. №4. С.94-108. DOI: 10.18412/1816-0387-2024-4-94-108 РИНЦ CAPlus OpenAlex
Даты:
Поступила в редакцию: 19 янв. 2024 г.
Принята к публикации: 5 мар. 2024 г.
Опубликована в печати: 1 июн. 2025 г.
Опубликована online: 24 июн. 2025 г.
Идентификаторы БД:
Web of science: WOS:001515178700005
Цитирование в БД: Пока нет цитирований
Альметрики: