Hydrogen Production by Autothermal Reforming of Methane over NiPd Catalysts: Effect of Support Composition and Preparation Mode Научная публикация
Журнал |
International Journal of Hydrogen Energy
ISSN: 0360-3199 , E-ISSN: 1879-3487 |
||||||
---|---|---|---|---|---|---|---|
Вых. Данные | Год: 2014, Том: 39, Номер: 36, Страницы: 20969-20983 Страниц : 15 DOI: 10.1016/j.ijhydene.2014.10.044 | ||||||
Ключевые слова | Autothermal reforming, Bimetallic catalyst, Hydrogen production | ||||||
Авторы |
|
||||||
Организации |
|
Информация о финансировании (1)
1 | European Commission | 262840 FP7-NMP-2010-LARGE-4 DEMCAMER |
Реферат:
NiPd/Ce0.5Zr0.5O2/Al2O3 and NiPd/La2O3/Ce0.5Zr0.5O2/Al2O3 catalysts were prepared by incipient wetness co-impregnation method or sequential impregnation method for autothermal reforming of methane (ATR of CH4). The influence of the preparation mode, Ce0.5Zr0.5O2 and La2O3 additives on the physicochemical properties of NiPd supported catalysts and the effect on their activity to produce hydrogen by ATR of CH4 were investigated. Characterization of fresh and spent Ni-based catalysts by X-ray fluorescence spectroscopy, N2 adsorption, X-ray diffraction, H2 temperature-programmed reduction, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy were performed. It was demonstrated that support composition determines NiO dispersion as well as reducibility of Ni species through different strength of Ni-support interaction. The preparation method modifies the phase composition and catalyst ability for reduction. The catalyst evolution under reaction conditions was studied. The NiO (∼15 nm) and NiPd alloy (∼18 nm) phases were observed in the spent catalysts. It was found that the Nio/NiO ratio can be regulated by support composition and preparation mode of catalysts. It is demonstrated that studied catalysts provide high methane conversion of 90–100%, CO yield of 55–85% and H2 yield of 55–75% in ATR of CH4 at 750–950 °C. The optimal composition and preparation method of catalyst were selected. The best ATR of CH4 performance is provided by 10 Ni0.5Pd/10Ce0.5Zr0.5O2/Al2O3 catalyst prepared by Pd/Ni sequential impregnation method that can be associated with peculiarity of NiPd particles structure and the optimal ratio between NiO species with different ability for reduction.
Библиографическая ссылка:
Ismagilov I.Z.
, Matus E.V.
, Kuznetsov V.V.
, Kerzhentsev M.A.
, Yashnik S.A.
, Prosvirin I.P.
, Mota N.
, Navarro R.M.
, Fierro G.J.
, Ismagilov Z.R.
Hydrogen Production by Autothermal Reforming of Methane over NiPd Catalysts: Effect of Support Composition and Preparation Mode
International Journal of Hydrogen Energy. 2014. V.39. N36. P.20969-20983. DOI: 10.1016/j.ijhydene.2014.10.044 WOS Scopus РИНЦ CAPlusCA OpenAlex
Hydrogen Production by Autothermal Reforming of Methane over NiPd Catalysts: Effect of Support Composition and Preparation Mode
International Journal of Hydrogen Energy. 2014. V.39. N36. P.20969-20983. DOI: 10.1016/j.ijhydene.2014.10.044 WOS Scopus РИНЦ CAPlusCA OpenAlex
Даты:
Поступила в редакцию: | 13 июл. 2014 г. |
Принята к публикации: | 10 окт. 2014 г. |
Опубликована online: | 7 нояб. 2014 г. |
Опубликована в печати: | 12 дек. 2014 г. |
Идентификаторы БД:
Web of science: | WOS:000347576200014 |
Scopus: | 2-s2.0-84937892593 |
РИНЦ: | 23870705 |
Chemical Abstracts: | 2014:1838166 |
Chemical Abstracts (print): | 161:756335 |
OpenAlex: | W2074922876 |