Luminescent Ceramic Materials Based on Laser-Synthesized Europium-Stabilized Zirconia Nanopowders | Sciact - CRIS-система Института катализа

Luminescent Ceramic Materials Based on Laser-Synthesized Europium-Stabilized Zirconia Nanopowders Научная публикация

Журнал

Ceramics International
ISSN: 0272-8842

Вых. Данные

Год: 2025, Том: 51, Номер: 29, Страницы: 60897-60907 Страниц : 11 DOI: 10.1016/j.ceramint.2025.10.284

Ключевые слова

Zirconia, Europium-stabilized zirconia, Spark plasma sintering, Luminescent ceramics, Laser vaporization, Europium ions

Авторы

Paygin V. ¹ , Kostyukov A. ² , Morkhova Yelizaveta ³ , Deulina D. ¹ , Nashivochnikov А. ² , Suprun E. ² , Dvilis E. ¹

Организации

1	National Research Tomsk Polytechnic University, 30 Lenina Ave, 634052, Tomsk, Russia
2	Boreskov Institute of Catalysis SB RAS, 5 Lavrentiev Ave, 630090, Novosibirsk, Russia
3	Samara State Technical University, Molodogvardeyskaya st. 244, 443100, Samara, Russia

Информация о финансировании (3)

1	Министерство науки и высшего образования Российской Федерации (с 15 мая 2018)	FWUR-2024-0033
2	Министерство науки и высшего образования Российской Федерации (с 15 мая 2018)	FSWW-2023-0011
3	Российский научный фонд	25-73-00231 (125102712137-8)

ZrO2-based materials are considered the gold standard for the manufacturing of ceramic materials used in various applications. Spark plasma sintering has been successfully applied to the fabrication of europiumstabilized zirconia (ESZ) ceramic materials from nanopowders synthesized by laser vaporization. Structural, morphological (XRD and SEM), mechanical, and spectroscopic (photoluminescence) analysis have been used to investigate the influence of the stabilizer (Eu3+) content on ceramics phase composition, crystallite size, relative density, mechanical, and luminescent properties of the ESZ-ceramic materials. The theoretical analysis of the conductive properties of europium-stabilized zirconia with varying Eu concentrations has been conducted. To achieve this, a fast geometrical-topological (GT) method, the bond valence site energy (BVSE) approach, and kinetic Monte Carlo simulation were used. It has been shown that the initial nanostructured ESZ powders have high purity, an average particle size from 11 to 14 nm, agglomerate sizes from 171 to 458 nm, and a specific surface area from 70.11 to 84.85 m2g-1. It has been found that powders, prepared by the laser vaporization method, are of practical interest for manufacturing ESZ-ceramic materials without the use of additional stabilizing additives or activators and can be considered potential promising materials for luminescent applications, such as luminescence sensors, light sources, biotechnology and as solid electrolyte due to its conductive properties.

Paygin V. , Kostyukov A. , Morkhova Y. , Deulina D. , Nashivochnikov А. , Suprun E. , Dvilis E.
Luminescent Ceramic Materials Based on Laser-Synthesized Europium-Stabilized Zirconia Nanopowders
Ceramics International. 2025. V.51. N29. P.60897-60907. DOI: 10.1016/j.ceramint.2025.10.284

Поступила в редакцию:	1 сент. 2025 г.
Принята к публикации:	20 окт. 2025 г.
Опубликована online:	24 окт. 2025 г.
Опубликована в печати:	1 дек. 2025 г.

Нет идентификаторов

Пока нет цитирований