Sciact
  • EN
  • RU

NH2-MIL-125 as a Promising Material for Adsorptive Heat Transformation and Storage Научная публикация

Журнал Energy
ISSN: 0360-5442 , E-ISSN: 1873-6785
Вых. Данные Год: 2016, Том: 100, Страницы: 18-24 Страниц : 7 DOI: 10.1016/j.energy.2016.01.034
Ключевые слова Adsorptive heat transformation, Heat storage, Metal-organic frameworks, NH2-MIL-125, Water vapor adsorption
Авторы Gordeeva Larisa G. 1,2 , Solovyeva Marina V. 2 , Aristov Yuri I. 1,2
Организации
1 Boreskov Institute of Catalysis, Ac. Lavrentiev av. 5, Novosibirsk 630090, Russia
2 Novosibirsk State University, Pirogova str. 2, Novosibirsk 630090, Russia

Информация о финансировании (3)

1 Российский фонд фундаментальных исследований 15-53-53096
2 Российский фонд фундаментальных исследований 16-03-00089
3 Федеральное агентство научных организаций России V.46.2.4.

Реферат: With increasing demand for heating and cooling, the effective utilization of renewable and waste thermal energy becomes a significant challenge. Due to its high energy saving potential AHT (Adsorption Heat Transformation) has gained more and more interest during the last three decades. Large advances in the enhancement of AHT performance can be achieved with the development of new adsorbents. In this paper, the results of a comprehensive study on water adsorption on NH2-MIL-125 and evaluation of the feasibility of the “NH2-MIL-125 – water” working pair for AHT are presented. It is shown that NH2-MIL-125 exchanges 0.39 g H2O g−1 under typical adsorptive chilling cycle conditions, which exceeds the uptake variation for common and innovative adsorbents. NH2-MIL-125 can be regenerated at 348 K which allows use of low-temperature heat sources. The isosteric enthalpy of water adsorption varies from −49.7 ± 1.0 kJ mol−1 to −54.8 ± 2.0 kJ mol−1 at an uptake of 0.03–0.40 g g−1. The adsorption capacity and porosity of NH2-MIL-125 change slightly during the first adsorption cycle and then remain constant. Based on the data obtained, the efficiency and specific power of the chilling cycle utilizing the “NH2-MIL-125 – water” pair were assessed as 0.77–0.80 and 3.2 kW kg−1, respectively, which is of high practical interest.
Библиографическая ссылка: Gordeeva L.G. , Solovyeva M.V. , Aristov Y.I.
NH2-MIL-125 as a Promising Material for Adsorptive Heat Transformation and Storage
Energy. 2016. V.100. P.18-24. DOI: 10.1016/j.energy.2016.01.034 WOS Scopus РИНЦ OpenAlex CAPlusCA
Даты:
Поступила в редакцию: 28 авг. 2015 г.
Принята к публикации: 14 янв. 2016 г.
Опубликована online: 15 февр. 2016 г.
Опубликована в печати: 1 апр. 2016 г.
Идентификаторы БД:
≡ Web of science: WOS:000375167100003
≡ Scopus: 2-s2.0-84962148694
≡ РИНЦ: 27145578
≡ OpenAlex: W2286520135
≡ Chemical Abstracts: 2016:248945
≡ Chemical Abstracts (print): 168:297661
Цитирование в БД:
≡ Web of science 99 Сбор данных от 20.02.2026
≡ Scopus 105 Сбор данных от 15.02.2026
≡ РИНЦ 94 Сбор данных от 15.02.2026
≡ OpenAlex 109 Сбор данных от 15.02.2026
Альметрики: