Carbon Materials for Gas Purification from Hydrogen Sulphide and Prospects of Their Use in Base Technologies for Associated Petroleum Gas Treatment
Научная публикация
Общее |
Язык:
Английский,
Жанр:
Статья (Full article),
Статус опубликования:
Опубликована,
Оригинальность:
Переводная
|
Журнал |
Chemistry for Sustainable Development
ISSN: 1817-1818
|
Вых. Данные |
Год: 2018,
Том: 26,
Номер: 6,
Страницы: 679-689
Страниц
: 11
DOI:
10.15372/CSD820180615
|
Ключевые слова |
gas purification, hydrogen sulphide, adsorption, selective catalytic oxidation, carbon catalysts, carbon sorbents, carbon, carbon nanotubes, carbon nanofibers, hydrogen sulphide removal facility, fluidized catalyst bed |
Авторы |
Khairulin S.R.
1
,
Ismagilov Z.R.
1,2
,
Kerzhentsev M.A.
1
,
Salnikov A.V.
1
,
Loginov R.I.
3
,
Philippov A.G.
4
,
Vildanov A.F.
5
,
Mazgarov A.M.
5
|
Организации |
1 |
Boreskov Institute of Catalysis, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
|
2 |
Institute of Coal Chemistry and Material Science, Federal Research Centre of Coal and Coal Chemistry, Siberian Branch, Russian Academy of Sciences, Kemerovo, Russia
|
3 |
Ltd “NOVATEK-Ust-Luga”, Vistino, Leningrad region, Russia
|
4 |
PJCS “GAZPROM”, Saint Petersburg, Russia
|
5 |
JSC “VNIIUS”, Kazan, Russia
|
|
Информация о финансировании (1)
1
|
Федеральное агентство научных организаций России
|
0303-2016-0014
|
Adsorbents and catalysts based on carbon materials used to remove hydrogen sulphide from gases are reviewed. Alongside with traditional carbon-based materials, much attention is paid to using carbon nanotubes and nanofibres to prepare catalysts for selective oxidation of hydrogen sulphide to sulphur. The efficiency of purification from hydrogen sulphide using catalysts based thereon is much higher, and nitrogen doping of materials substantially improves characteristics of this process. The paper describes three base technologies for hydrogen sulphide removal. They are developed at the Boreskov Institute of Catalysis, Siberian Branch, Russian Academy of Sciences and are based on the use of the fluidized bed of the catalyst for selective oxidation of hydrogen sulphide and catalysts-sorbents in the fixed bed. The technologies were as follows: 1) treatment of acid gases from amine purification of associated petroleum gas; 2) purifying gases from blowing off sour crude oil, and 3) utilizing oxidation of hydrogen sulphide directly as a component of associated petroleum gas. Efficient carbon catalysts and sorbents are suggested to be used for the second-stage treatment of tail gas from facilities made according to base technologies.