Structure and Mechanical Properties of Three-Layer Composites Obtained by Magnetic Pulse Welding of Titanium and Zr-Based Metallic Glass | Sciact - CRIS-система Института катализа

Structure and Mechanical Properties of Three-Layer Composites Obtained by Magnetic Pulse Welding of Titanium and Zr-Based Metallic Glass Научная публикация

Журнал

International Journal of Advanced Manufacturing Technology
ISSN: 0268-3768 , E-ISSN: 1433-3015

Вых. Данные

Год: 2024, Том: 132, Страницы: 1883–1895 Страниц : 13 DOI: 10.1007/s00170-024-13484-0

Ключевые слова

Metallic glass; Metal matrix composites; Laminated composites; Magnetic pulsed welding; Numerical simulation

Авторы

Lazurenko Daria V. ^1,2 , Ivannikov Alexander A. ³ , Anisimov Alexander G. ⁴ , Popov Nikita S. ³ , Emurlaev Kemal I. ^1,5 , Dovzhenko Gleb D. ^1,5 , Bataev Ivan A. ¹ , Kuzmin Ruslan I. ¹ , Kuper Konstantin E. ^5,6

Организации

1	Novosibirsk State Technical University, Karl Marks Av. 20, 630073 Novosibirsk, Russia
2	St Petersburg State University, Universitetskaya Embankment, 7-9, 199034 St
3	National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Kashirskoye Shosse, 31, 115409 Moscow, RussiaPetersburg, Russia
4	Lavrentiev Institute of Hydrodynamics SB RAS, Lavrentiev Av., 15, 630090 Novosibirsk, Russia
5	Synchrotron Radiation Facility - Siberian Circular Photon Source (SKIF), Boreskov Institute of Catalysis SB RAS, Kol’tsovo 630559, Russia
6	Budker Institute of Nuclear Physics of Siberian Branch, Russian Academy of Sciences, Lavrentiev Av. 11, 630090 Novosibirsk, Russia

Metallic glass-reinforced metal matrix composites (MMCs) are in the focus of attention of many research groups due to the outstanding properties provided by a combination of ductile crystalline matrix and high-strength glassy phase. To date, many fabrication techniques have been used to form such composites. Most of them are based on pressure-assisted sintering of glassy and crystalline components. However, the selection of the heating temperature and holding time is challenging due to the low thermal stability of the metallic glasses (MGs). In this study, a solid-state magnetic pulse welding (MPW) technique was used for manufacturing laminated Ti-based composites with Zr-based MG reinforcement. The structure of the interfaces between Ti and MG layers was studied using light microscopy (LM), scanning electron microscopy (SEM), and synchrotron X-ray diffraction (SXRD). The experimental study was supplemented with smoothed-particle hydrodynamics (SPH) numerical simulations. The Ti-MG-Ti composite obtained by MPW possessed high quality of joint and had no macroscopic defects such as cracks or lack of fusion. The formation of a firm joint was provided by the plastic flow of titanium. Deformation processes in the titanium plates developed mainly in the interfacial zones, while the MG ribbons subjected to deformation by shear mechanism through the entire thickness. Due to the short-term thermal impact and high cooling rates, MPW retained a disordered structure of MG, despite local melting occurring at the interfaces and in shear bands. Tensile tests of composites containing 5 vol. % and 13 vol. % of MG phase showed that their strength follows the rule of mixtures.

Lazurenko D.V. , Ivannikov A.A. , Anisimov A.G. , Popov N.S. , Emurlaev K.I. , Dovzhenko G.D. , Bataev I.A. , Kuzmin R.I. , Kuper K.E.
Structure and Mechanical Properties of Three-Layer Composites Obtained by Magnetic Pulse Welding of Titanium and Zr-Based Metallic Glass
International Journal of Advanced Manufacturing Technology. 2024. V.132. P.1883–1895. DOI: 10.1007/s00170-024-13484-0 WOS Scopus РИНЦ OpenAlex СКИФ ID

Поступила в редакцию:	7 нояб. 2023 г.
Принята к публикации:	19 мар. 2024 г.
Опубликована online:	25 мар. 2024 г.
Опубликована в печати:	1 мая 2024 г.

Web of science:	WOS:001190482200006
Scopus:	2-s2.0-85188528729
РИНЦ:	66547829
OpenAlex:	W4393146085
СКИФ ID:	1608

БД	Цитирований
Scopus	1
OpenAlex	2
РИНЦ	2