Structure and Mechanical Properties of Three-Layer Composites Obtained by Magnetic Pulse Welding of Titanium and Zr-Based Metallic Glass | Sciact - CRIS-system of Boreskov Institute of Catalysis

Structure and Mechanical Properties of Three-Layer Composites Obtained by Magnetic Pulse Welding of Titanium and Zr-Based Metallic Glass Full article

Journal

International Journal of Advanced Manufacturing Technology
ISSN: 0268-3768 , E-ISSN: 1433-3015

Output data

Year: 2024, Volume: 132, Pages: 1883–1895 Pages count : 13 DOI: 10.1007/s00170-024-13484-0

Tags

Metallic glass; Metal matrix composites; Laminated composites; Magnetic pulsed welding; Numerical simulation

Authors

Lazurenko Daria V. ^1,2 , Ivannikov Alexander A. ³ , Anisimov Alexander G. ⁴ , Popov Nikita S. ³ , Emurlaev Kemal I. ^1,5 , Dovzhenko Gleb D. ^1,5 , Bataev Ivan A. ¹ , Kuzmin Ruslan I. ¹ , Kuper Konstantin E. ^5,6

Affiliations

1	Novosibirsk State Technical University, Karl Marks Av. 20, 630073 Novosibirsk, Russia
2	St Petersburg State University, Universitetskaya Embankment, 7-9, 199034 St
3	National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Kashirskoye Shosse, 31, 115409 Moscow, RussiaPetersburg, Russia
4	Lavrentiev Institute of Hydrodynamics SB RAS, Lavrentiev Av., 15, 630090 Novosibirsk, Russia
5	Synchrotron Radiation Facility - Siberian Circular Photon Source (SKIF), Boreskov Institute of Catalysis SB RAS, Kol’tsovo 630559, Russia
6	Budker Institute of Nuclear Physics of Siberian Branch, Russian Academy of Sciences, Lavrentiev Av. 11, 630090 Novosibirsk, Russia

Metallic glass-reinforced metal matrix composites (MMCs) are in the focus of attention of many research groups due to the outstanding properties provided by a combination of ductile crystalline matrix and high-strength glassy phase. To date, many fabrication techniques have been used to form such composites. Most of them are based on pressure-assisted sintering of glassy and crystalline components. However, the selection of the heating temperature and holding time is challenging due to the low thermal stability of the metallic glasses (MGs). In this study, a solid-state magnetic pulse welding (MPW) technique was used for manufacturing laminated Ti-based composites with Zr-based MG reinforcement. The structure of the interfaces between Ti and MG layers was studied using light microscopy (LM), scanning electron microscopy (SEM), and synchrotron X-ray diffraction (SXRD). The experimental study was supplemented with smoothed-particle hydrodynamics (SPH) numerical simulations. The Ti-MG-Ti composite obtained by MPW possessed high quality of joint and had no macroscopic defects such as cracks or lack of fusion. The formation of a firm joint was provided by the plastic flow of titanium. Deformation processes in the titanium plates developed mainly in the interfacial zones, while the MG ribbons subjected to deformation by shear mechanism through the entire thickness. Due to the short-term thermal impact and high cooling rates, MPW retained a disordered structure of MG, despite local melting occurring at the interfaces and in shear bands. Tensile tests of composites containing 5 vol. % and 13 vol. % of MG phase showed that their strength follows the rule of mixtures.

Lazurenko D.V. , Ivannikov A.A. , Anisimov A.G. , Popov N.S. , Emurlaev K.I. , Dovzhenko G.D. , Bataev I.A. , Kuzmin R.I. , Kuper K.E.
Structure and Mechanical Properties of Three-Layer Composites Obtained by Magnetic Pulse Welding of Titanium and Zr-Based Metallic Glass
International Journal of Advanced Manufacturing Technology. 2024. V.132. P.1883–1895. DOI: 10.1007/s00170-024-13484-0 WOS Scopus РИНЦ OpenAlex publication_identifier_short.sciact_skif_identifier_type

Submitted:	Nov 7, 2023
Accepted:	Mar 19, 2024
Published online:	Mar 25, 2024
Published print:	May 1, 2024

Web of science:	WOS:001190482200006
Scopus:	2-s2.0-85188528729
Elibrary:	66547829
OpenAlex:	W4393146085
publication_identifier.sciact_skif_identifier_type:	1608

DB	Citing
Scopus	1
OpenAlex	2
Elibrary	2